| After-sales Service: | Online Service Long Life |
|---|---|
| Warranty: | 1 Year |
| Type: | Reaction Kettle |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
( Lifting ) Glass reactors are mainly used for synthetic reactions, distillation and concentration of different types of materials. We have single wall, double wall and triple wall glass reactors. The reactor can be pumped to a negative pressure state according to some experimental requirements. A constant pressure funnel or an adjusting valve on the feeding bottle allows you to add material to the vessel at a uniform and controlled speed. Condenser helps to recover some materials distillate during reaction. Circulating liquid can be filled into the jacket to heat or cool materials inside. Triple wall glass reactor with two jackets, the inner jacket is for circulating liquid, and the outer layer should be pumped to vacuum condition for thermal insulation.
( Lifting ) Glass reactors are widely applied in the experiment, middle-scale tests, and production of chemistry, fine chemical engineering, biology and synthesis of new materials. Glass reactors can be made into system devices with multi-purpose circulating water vacuum pumps, diaphragm vacuum pumps, low temperature circulating pump(vacuum), circulating cooler, constant temperature circulator, low temperature cooling liquid circulating pump, high temperature heating bath circulator and hermetic cooling and heating circulator.
| Model | LR-S-100L | |
| Effective volume in the kettle (L) | 100L | |
| Kettle body specifications | Inner diameter 460mm, outer diameter 500mm, inner length 650mm | |
| Jacket volume in the kettle (L) | About 20L | |
| Voltage | 220V50HZ | |
| Total power | 370W | |
| Glass material components | High borosilicate glass 3.3 | |
| Kettle body temperature resistance range | -80ºC~+250ºC | |
| Temperature measurement accuracy | ±1ºC | |
| Constant pressure funnel volume (L) | 2L | |
| Collection bottle (L) | 10L | |
| Sand core | PTFE sand core (No. 3) can be filtered | |
| Constant pressure funnel specifications | The upper part has a 29 standard port piston and the lower part has a 35 flange port. | |
| Condenser heat exchange area (m2) | 0.6 | |
| Allowable pressure in the kettle (Mpa) | -0.1-0.0 | |
| Allowable pressure of jacket (Mpa) | ≤0.03 | |
| Lift motor power (W) | 120W | |
| Stirring motor | Rated power (W) | 250W |
| Speed adjustment method | Frequency | |
| Speed adjustment range | 0~600rpm/min | |
| Cauldron lid opening | Stirring port | Φ50mm flange port |
| Constant pressure funnel mouth | DN25 ball grinding mouth | |
| Thermometer port | 35# flange mouth | |
| Pressure reducing port | 35# flange mouth | |
| Solid feeding port | φ80mm flange mouth, inner diameter 60mm | |
| Condenser connection port | DN25 ball grinding mouth | |
| Main frame material | SU304 stainless steel + square steel spray | |
| Kettle body lifting stroke | 400mm | |
| Impeller | Φ 17×1300H (mm) Leaf span 200 mm | |
| Specifications of the fluid circulation interface in and out of the kettle body | Flange port with outer diameter 35mm, equipped with 6-point buffer tube, external interface with 6-point wire port | |
| Temperature Sensor | PT100, outer PTFE | |
| Pressure reducing valve | 34# glass PTFE valve, air release port 12mm | |
| Condenser specifications |
Φ120×600H (mm) lower φ50mm flange port | |
| Condenser circulation connection size | Pagoda outer diameter 12mm | |
| Vacuum exhaust port size | Pagoda outer diameter 12mm | |
| Discharge valve | No liquid accumulation discharge valve, the outer diameter of the liquid outlet is 33mm | |
| Operating ambient temperature (ºC) | 5-35 | |
| Machine footprint size (mm) | 1200L×800W×2800H(mm) | |
| Packing size (mm) | 2100L×1260W×830H(mm) | |
| Overall machine weight (Kg) | 270Kg | |
1) Reaction kettle can be lifted up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2) Reaction kettle can be rotated for 360 degrees, it is convenient to use and clean.
3) Use a flange to seal the glass interface, avoid using vacuum silicon to seal and open it in difficulty.
4) Connect it using a flange interface, it can withstand the positive pressure to 0.03MPa.
Zhengzhou Keda Machinery and Instrument Equipment Co., Ltd. is specialized in R & D, production, sales, teaching and chemical biology pharmacy equipment integrated company. The main products are rotary evaporator, jacketed glass reactor, single layer glass reactor, circulating water vacuum pump, low-temperature reaction bath (slot), low temperature cooling fluid circulating pump(cool chiller), vacuum drying oven, blast drying oven, freeze dryer, water/oil bath, magnetic heating stirrer, overhead mixer, ultrasonic cleaning machine, lift platform, etc. Besides, we act as agents of some domestic and foreign famous enterprise products, sustaining high praise in domestic junior colleges and universities, scientific research units, etc. Our products are sold to USA, Australia, Asia, Brazil, Iran, Egypt, etc. countries and our customers have been fully affirmation.
Factory Size: 1,000-3,000 square meters
Year Established: 2009
Total Revenue: US$1 Million - US$2.5 Million
Registration No.: 410105000067362
Main Markets: Central America, Mid East, Oceania, Africa, South America
Packing:
Shipping:
| Shipping method | Note |
| Express | Door to door, very convenient, don't need to clearance or pick-up |
| By air |
Airport to airport, you need to do the customs clearance and pick up the goods at your local airport,which you can have a local shipping agent to do for you. |
| By sea |
Port to port and you need to do the customs clearance and pick-up the goods
at your local port, which you can have a local shipping agent to do for you. |
Zhengzhou Keda Machinery and Instrument Equipment Co., Ltd. is a famous manufacturer of lab equipment located in central China. The main product is high temperature circulating water/oil bath, rotary evaporator, short path distillation, glass reactor, circulating water vacuum pump, low-temperature reaction bath (slot), cooling chiller, drying oven, high-pressure reaction kettle, freeze dryer, water/oil bath, magnetic heating stirrer, hydrothermal synthesis reactor, heating mantle, lift jack, etc. Our company has become a pacesetter of the lab instruments in China.
Pre-sale Service:
24 Hours online service for your consult.
Help choose the suitable model, and a series of services, person, and advice.
Middle service:
--Give your best offer
--Provide discount for many sets of order
--Do customer's request:
--Choose the payment term you convenient.
--Promptly production and delivery, inform you in time.
--Can provide invoice value as you like to decrease your tax.
After-sale service:
--1 year warranty service and all life maintenance.
--Technical Engineers are available for oversea training.
--Free change for some parts
--Remote control technical consult
--Free installation of DVD
--Maintenance plan
1. What's the minimum order quantity?
One set at present.
2. What kind of payment terms do you accept?
Normally we accept TT, Paypal, Western Union, Alibaba Escrow, and L/C. The exact term will be discussed during the deal.
3. How will you deliver these goods?
It will be decided according to your quantity. Normally we will choose International Express, Air and sea.
4. How will package glass equipment be?
We package these glass equipment in good and Nonfumigation standard wooden cases.
5. Can you accept OEM terms?
Sure.
6. How to choose suitable equipment?
You tell us your requirements (For example capacity, temperature range, pressure, etc ), we will recommend you the best suitable equipment.
We are confident in providing the professional products and services you want,
We guarantee that your inquiry will be received our immediate attention.
){kind=link}